Arturia Minibrute

Mr. Nobody
#91 por Mr. Nobody el 16/08/2015
Y que pasaria con la conexion Clock de la izquierda que pone Arp Free?

Joeee... Corrigo, no es un conector de Clock Midi, es el selector de Sync Arp o Arp libre... Les falto la pegatina para eso... o a lo mejor en modo Seq va clavado a Sync Clock y no puede ir Free...

Buenas noxes! :smile:
Subir
OFERTASVer todas
  • -21%
    Zoom H4n Pro Black
    158 €
    Ver oferta
  • -26%
    AKAI MPC Key 61
    1.290 €
    Ver oferta
  • -8%
    Behringer X Air XR18
    645 €
    Ver oferta
Lolo López
#92 por Lolo López el 16/08/2015
Lo acabo de probar,en posición arp sincroniza el LFO al secuenciador , igual que hace con el arpegiador. En posición free el LFO va a su rollo.
Subir
Lolo López
#93 por Lolo López el 16/08/2015
#91 el clock es para el LFO, en arp va sincronizado al seq y con el rate cambia de velocidad pero siempre al ritmo del seq( 1/4,1/2,1,hasta 4 veces la velocidad del seq) y en free oscila a su rollo ajustado por el rate sin sincronizar con el sequencer.
Subir
Nino
#94 por Nino el 16/08/2015
Al parecer el problema de la tecla levantada es común en el cacharro. La tecla que se me jodio a mí es la misma que aparece en el vídeo y en los comentarios vi que a otros les ha sucedido lo mismo.
Subir
Lolo López
#95 por Lolo López el 16/08/2015
#94 Mal apaño tiene eso... Manda un correo a technical-inquiry@arturia.com , a ver que te dicen... Si está en garantía te dirán que te pongas en contacto con el distribuidor, he leído en el foro de arturia que han mandado algunos repuestos a gente con el mismo problema.
Si no tienes suerte, siempre te quedará hacer un apaño con superglue... O esto:
Archivos adjuntos ( para descargar)
imgext.jpeg
Subir
1
Lolo López
#96 por Lolo López el 16/08/2015
El año pasado un comunicado sobre este problema por parte de Arturia:

"We are of course aware of the issue that affected some Minibrute units in two specific production batches from 2013.
We did investigate and found the cause of the issue. (At a certain points during the production of the keybed parts, the injection of plastic into the mold was not done at constant temperature. This created a weakness in some keys.)
This concerns in fact a limited number of products even if people having issues are naturally more vocal -and have all the rights to be. Less than 4% of the keyboards within these two batches were affected. Still Arturia did replace all keybeds in their entire stock and so did their distributors as well. We are aware that some units have reached end-users this is why we extended the guarantee to three years on the MiniBrute keybeds. Of course we have put more quality controls on the production following this problem.
In any case the Special Edition comes with keybeds that have been tested right. So you should not be scared.
As a conclusion we understand the frustration of customers who trusted us and got issues with the MiniBrute. We have replaced faulty units as quickly as we could, along with our distribution partners and we will keep on doing so when needed. But it should not affect the value of a good product that is reliable and used by many musicians now."

We just received a shipment of containers in regard of the Keybeds issues.
Depending on the warranty period, we can send the new Keybeds directly from you or from our distributors:
==> http:// [url]http://www.arturia.com/evolution/en/buy/distributors.html [/ url]

For the US : us_support@arturia.com

For the rest of the world, If you have not received a reply or you're out area, please write an email to the following address:
distributors.support@arturia.com


We need this specific information:
1/ A picture showing the issue
2/ Your address and phone number
3/ For the warranty, a proof of purchase of the product.

Please note that we will do our best to provide you with keyboards in Timely Manner.[/url]
Subir
Mr. Nobody
#97 por Mr. Nobody el 16/08/2015
Oh yes, oh yes, oh yeees...
Subir
Nino
#98 por Nino el 16/08/2015
Ya ni llorar es bueno jajaja así lo dejare ya que en realidad no me afecta pero si deja mucho que desear por parte de arturia la mala calidad en cuanto a la construcción del sinte; en cuanto al sonido no me puedo quejar me gusta bastante.
Subir
Mr. Nobody
Lolo López
#100 por Lolo López el 07/09/2015
Lo has encontrado, eh pirata? :secreto:
Subir
1
Nino
#101 por Nino el 09/09/2015
#99 Gracias hermano por el truco :)
Subir
1
Davitek
#102 por Davitek el 06/10/2015
Buenas.... He leido el hilo de arriba a abajo y el manual y sigo con la misma duda.....

Alguien ha comentado que el teclado solo envia "El teclado solo manda señales Midi Gate On/Off y a veces Presion y Velocity...."

Vale... pero alguien me puede decir si envia las notas del arpegiador/sequencer... Vamos que si el arpegio se lo pudeo mandar a mi ms20 mini via midi o CV o si lo puedo mandar al DAW via midi in y gravarlo en una pista midi, para retocarlo... usarlo con un VST...

Gracias
Subir
Mr. Nobody
#103 por Mr. Nobody el 06/10/2015
El arpegiador y secuenciador son una combinacion de notas midi gate on/off... Te vale con eso?


No te has leido el manual... y eso que esta en castellano.
Subir
Davitek
#104 por Davitek el 06/10/2015
Vale, vale... :wink: jejejeje

Me lo he leido y no lo he entendido (por cierto el manual no esta en castellano por lo menos no en su web...)

Entonces la respuesta es SI... si yo me curro una sequencia en el mini la puedo sacar por el midiOut y gravarla en midi en el Ableton no??

Gracias por la ayuda :birras:
Subir
Mr. Nobody
#105 por Mr. Nobody el 06/10/2015
Que yo sepa el MiDi es igual en todos...
Subir
Hilos similares
Nuevo post

Regístrate o para poder postear en este hilo