Como conectar la mackie 24-4 a un interface motu 2408mk3?
OFERTASVer todas
-
-26%Audix FP-7 F9 Drumset 70th Bundle
-
-37%Behringer SU9920
-
-22%Universal Audio Volt 2 Studio Pack
La 2408mkII es PCI no firewire.
La onix 24 es una mesa totalmente analógica, no es compatible con tdif.
En principio si quieres conectar 24 in/out a la makie sería mejor la Motu 24I/O y no la 2408mkII que solo tiene 8 in/out analógicos.
76. DIRECT OUTS
Each of these DB-25 connectors provides balanced
direct outputs for eight channels. They are designed to
be connected directly to a recorder’s analog inputs, and
use the TASCAM standard pinout for analog signal connections
(the same standard used on the analog cards
for the Mackie D8B, DXB, and Hard Disk Recorder).
The signal at the DIRECT OUTS comes after the input
GAIN control, Low-Cut switch, and INSERT jack, but
before the EQ. This way you can EQ a channel and adjust
the channel fader to suit your live mix, but it has no
effect on the signal going to the recorder. This provides
maximum flexibility for the mixdown stage.
La onix 24 es una mesa totalmente analógica, no es compatible con tdif.
En principio si quieres conectar 24 in/out a la makie sería mejor la Motu 24I/O y no la 2408mkII que solo tiene 8 in/out analógicos.
76. DIRECT OUTS
Each of these DB-25 connectors provides balanced
direct outputs for eight channels. They are designed to
be connected directly to a recorder’s analog inputs, and
use the TASCAM standard pinout for analog signal connections
(the same standard used on the analog cards
for the Mackie D8B, DXB, and Hard Disk Recorder).
The signal at the DIRECT OUTS comes after the input
GAIN control, Low-Cut switch, and INSERT jack, but
before the EQ. This way you can EQ a channel and adjust
the channel fader to suit your live mix, but it has no
effect on the signal going to the recorder. This provides
maximum flexibility for the mixdown stage.
Mi tarjeta es una pci-424, y la mk3 va conectada a ella via firewire. La mackie no tiene salidas por canal excepto con los conectores db 25. S si son incompatibles, no hay algo que pueda trasformar estas salidas en tdif? algo así como esto:
direct outs (mackie db 25)--------------convertidor ad/da------------------tdif (motu mk3)
direct outs (mackie db 25)--------------convertidor ad/da------------------tdif (motu mk3)
Hilos similares
Nuevo post
Regístrate o identifícate para poder postear en este hilo