Necesito Ayuda Urgente !

Hola a todos.
Necesito que alguien me diga que diferencias hay entre la DIGI9652 y la HDSP9652 de RME !!!!

Me ayudariais un huevo.

Saludos.

pues haber yo no se si me entere muy bien pero me digeron que la hdsp9652 es para trabajar en entornos digitalesy conexiones con adat, creo que trae tre puertos para adat cuando la otra solo trae uno

la otras es para conexion de los digiface o sobre todo multiface si se trabaja en entorno analogico.

de todas formas en microfusa te lo pueden aclarar el chico encargado del tema de rme se llama carlos y es bastante apañao

La HDSP9652 es la sustituta natural de la digi9652.

Algo parecido ha ocurrido con toda la gama digi96/8 (la PST, la PRO,...) que han sido aglutinadas en la digi96/8 PAD.

http://www.rme-audio.com/english/hammer/d9652.htm

Clíca en el enlace y veras como sobre la foto de la digi9652 pone "Replaced by the HDSP9652."

DIGI9652-------------------------------------------------------------------

3 x ADAT digital I/O, based on RME's reliable Bitclock PLL
1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
1 x Word clock I/O (BNC) on included expansion board
1 x Breakout cable for coaxial SPDIF operation
Zero wait state PCI Busmaster interface with additional burst FIFO (130 MB/s transfer rate in both directions)
No drop out problems at high PCI bus load
New hardware design: 52 mono channels in block mode, organized in 32 bit ASIO double buffers
ASIO poured in hardware! The result in speed and performance is 0 (zero!)% CPU load when using ALL 52 channels!
130 MB/s transfer rate for record and playback results in only 9% PCI bus load when using all 52 channels
New Enhanced Zero Latency Monitoring, now operational even with different sample rates at input and output
S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback

HDSP9652-----------------------------------------------------------------

3 x ADAT digital I/O, based on RME's reliable Bitclock PLL
1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology
1 x ADAT Sync In (9-pin D-type) for sample accurate transfers
1 x Word clock I/O (BNC) on included expansion board
1 x Breakout cable for coaxial SPDIF operation
Zero wait state PCI Busmaster interface with additional burst FIFO (130 MB/s transfer rate in both directions)
No drop out problems at high PCI bus load
New hardware design: 52 mono channels in block mode, organized in 32 bit ASIO double buffers
ASIO poured in hardware! The result in speed and performance is 0 (zero!)% CPU load when using ALL 52 channels!
130 MB/s transfer rate for record and playback results in only 9% PCI bus load when using all 52 channels
New Enhanced Zero Latency Monitoring, now operational even with different sample rates at input and output
S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback

DIGI9652

HDSP9652

DIGI9652--------------------------------------------------------------------

TECHNICAL SPECIFICATIONS AND FEATURES

Supported sample frequencies: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
All settings changeable in realtime, all output options even in playback mode
Clock modes slave and master
Special sample buffer avoids noise even in asynchronous Full Duplex operation
Enhanced Mixed mode: ADAT® input plus SPDIF input plus all outputs simultaneous operational
Automatic and intelligent master/slave clock control
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms
Byte swap for Mac included in hardware
Enhanced Zero Latency Monitoring: realtime monitoring in all clock modes and even at different sample rates
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Complete interrupt sharing
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), internal (CD-ROM/Sync-In), word clock (BNC)
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical
Output 3 x optical (TOSLINK), coaxial (Cinch), internal (Sync-Out), word clock (BNC)
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical

HDSP9652-----------------------------------------------------------------

TECHNICAL SPECIFICATIONS AND FEATURES Top

Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels!
All settings changeable in realtime
Clock modes slave and master
Automatic and intelligent master/slave clock control
Enhanced Mixed mode: All inputs and outputs simultaneously operational
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode
Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring
Comes with DIGICheck: the ultimate measurement, analysis and test tool
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC)
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical
Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC)
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical