El equipo que vendo es el que muestro a continuación. Los interesados pueden llamar al telef. 699 74 76 56 (Juanjo)
Altavoces DLS R1070 --> 160€
Woofer size 7 x 10" (195 x 265 mm)
Tweeter 20 mm (08") tweeter / 50 mm (2") midrange
Power handling capacity 100 W RMS / 150 W max
Impedance 4 ohm
Frequency range 30 - 20.000 Hz
Sensitivity 93 dB (1W/1m)
Crossover 12dB HP / 6 dB LP
Size of filter box 60 x 30 x 30 mm
Outer diameter of woofer 195 x 265 mm (7,68 x 10,4")
Magnet size 145 mm (5,7")
Mounting depth 85 mm (3,35")
Mounting hole 156 x 225 mm (6,15" x 8,86")
Weight 10,3 kg / 22,7 lbs
Subwoofer JL Audio CP112G-w1v2 Loaded 12" --> 140€
12" W1v2 Single 4 ohm Subwoofers in a Slot-Ported PowerWedge Enclosure
Power Handling:
Peak: 600 watts
RMS: 300 watts
Injection-molded, metallic-finish polypropylene cone woofer
Butyl rubber surround
Interlocking cone and dust cap
Dynamic Motor Analysis improves dynamic motor behavior
Floating cone attachment method bonds the surround/cone to the voice coil/spider
Vented reinforcement collar
Elevated frame cooling system delivers cool air through slots about the voice coil on the speaker
Frequency response: 20-250 Hz
Sensitivity: 87 dB
1-year Sonic Electronix warranty (subwoofer only)
Etapa Coral XTA 130 --> 190€
Potencia máxima: 1400 w.
Potencia a 4 Ω: 1x300 w rms.
Potencia a 2 Ω: 1x500 w rms.
Potencia a 1 Ω: 1x700 w rms.
Respuesta frecuencia: 10-250 Hz
Distorsion (THD): 0.05 %
Relacion señal/ruido: 110 db
Sensibilidad de entrada: 0.2-7 V
Crossover variable:
Low-pass: 35-250 Hz
Filtro subsonico ajustable: 16-80Hz 12 db/oct
X-pander ajustable: 0-18 db @ 40Hz
Ajuste de phase 0-180
Consumo maximo: 70 A
Dimensiones: 240x340x56 mm
Etapa Steg K4/02 --> 200€
Potencia rms a 4 Ω: 4x120 W
Potencia rms a 2 Ω: 4x210 W
Potencia en puente a 4 Ω: 2x420 W
Respesta frecuencia: 5-170000 Hz
Crossover ajustable con modulos AQXM2
Distorsion THD: 0.04 %
Relacion señal/ruido: 107 db
Factor damping: >1000
Fusibles: 125 Amp
Dimensiones: 50x23.5x5.5 cm
Altavoces DLS R1070 --> 160€
Woofer size 7 x 10" (195 x 265 mm)
Tweeter 20 mm (08") tweeter / 50 mm (2") midrange
Power handling capacity 100 W RMS / 150 W max
Impedance 4 ohm
Frequency range 30 - 20.000 Hz
Sensitivity 93 dB (1W/1m)
Crossover 12dB HP / 6 dB LP
Size of filter box 60 x 30 x 30 mm
Outer diameter of woofer 195 x 265 mm (7,68 x 10,4")
Magnet size 145 mm (5,7")
Mounting depth 85 mm (3,35")
Mounting hole 156 x 225 mm (6,15" x 8,86")
Weight 10,3 kg / 22,7 lbs
Subwoofer JL Audio CP112G-w1v2 Loaded 12" --> 140€
12" W1v2 Single 4 ohm Subwoofers in a Slot-Ported PowerWedge Enclosure
Power Handling:
Peak: 600 watts
RMS: 300 watts
Injection-molded, metallic-finish polypropylene cone woofer
Butyl rubber surround
Interlocking cone and dust cap
Dynamic Motor Analysis improves dynamic motor behavior
Floating cone attachment method bonds the surround/cone to the voice coil/spider
Vented reinforcement collar
Elevated frame cooling system delivers cool air through slots about the voice coil on the speaker
Frequency response: 20-250 Hz
Sensitivity: 87 dB
1-year Sonic Electronix warranty (subwoofer only)
Etapa Coral XTA 130 --> 190€
Potencia máxima: 1400 w.
Potencia a 4 Ω: 1x300 w rms.
Potencia a 2 Ω: 1x500 w rms.
Potencia a 1 Ω: 1x700 w rms.
Respuesta frecuencia: 10-250 Hz
Distorsion (THD): 0.05 %
Relacion señal/ruido: 110 db
Sensibilidad de entrada: 0.2-7 V
Crossover variable:
Low-pass: 35-250 Hz
Filtro subsonico ajustable: 16-80Hz 12 db/oct
X-pander ajustable: 0-18 db @ 40Hz
Ajuste de phase 0-180
Consumo maximo: 70 A
Dimensiones: 240x340x56 mm
Etapa Steg K4/02 --> 200€
Potencia rms a 4 Ω: 4x120 W
Potencia rms a 2 Ω: 4x210 W
Potencia en puente a 4 Ω: 2x420 W
Respesta frecuencia: 5-170000 Hz
Crossover ajustable con modulos AQXM2
Distorsion THD: 0.04 %
Relacion señal/ruido: 107 db
Factor damping: >1000
Fusibles: 125 Amp
Dimensiones: 50x23.5x5.5 cm
